Designed and assembled in France, the MOW702 men's watch features a skeleton dial housing a Japanese quartz movement. This model, in black and gold tones, combines a monochrome steel case with a black crocodile leather strap, giving it a distinctive and refined touch.
This model features a screw-down crown. Make sure to fully press and screw the crown clockwise until it is fully tightened to ensure better water resistance.
Each watch is sold in its Montignac case with its warranty booklet.
Functions: 3 hands (hours, minutes, seconds), date, day of the week
Movement: quartz
Battery life: approximately 3 years
Display:
Crown operation:
Crown Position
0: normal
1: 1st click
2: 2nd click
Crown
Free
Date setting
Time setting
( ! ) Please refer to the watch description page to check the crown type of your watch. If the crown of your watch is screw-down type, it is necessary to unlock the screw-down crown before operating and relock it after operating. Unscrew the crown by turning it counterclockwise / Screw up the crown by turning it clockwise.
Setting procedure:
How to set day: (1) Pull the crown out to position 2 when the seconds hand is at the 12 o'clock position. (2) Turn the hour and minute hands clockwise to set the day. To set the day, advance the hour hand ahead of 24 hours per day. *Do not set the day by turning the crown counterclockwise. Otherwise, the day will not change. *The day changes between midnight and 5:30 a.m. or a little later.
How to set time: After setting the day, adjust the hour and minute hands. (1) Turn the crown clockwise to set the hour and minute hands. *When setting the minute hand, advance it to 4 or 5 minutes ahead of the desired time before next step. *When setting the hour & minute hands, take AM/PM into consideration. When the day changes over, it’s AM. (2) Once the time is set, push the crown to position 0, seconds hand begins to run.
How to set date: (1) Pull the crown out to position 1. (2) Turn the crown counterclockwise to set the date quickly. (3) Once the date has been set, push the crown back to position 0. *Do not set the date between 9pm and 1am. Otherwise, it may not set correctly. *The date hand will not move backwards when turning the crown clockwise.